14
How to Replace Receiver
Maintenance
1.
Periodic cleaning of your new ceiling fan is the only
maintenance that is needed. When cleaning, use
only a soft brush or lint free cloth to avoid
scratching the finish. Abrasive cleaning agents are
not required and should be avoided to prevent
damage to finish.
Do not use water when cleaning your ceiling fan.
It could damage the motor or the finish and create
the possibility of electrical shock.
CAUTION
Periodic light dusting of the blades is recommended.
A feather duster will work best.
How to Clean Your Ceiling Fan Blades
Avoid using water, cleansers, or harsh rags, which
can warp and ruin the finish.
1.
Remove motor coupling cover by unscrewing
the two screws. (Figure 30)
2.
Unplug antenna, signal wire and 9-PIN connector than
replace new receiver. (Figure 31)
3.
Tight the two screws from the motor coupling cover.
(Figure 32)
Figure 30
Motor
Coupling
Cover
Figure 32
4.
After installing new receiver to your fan, operate the
remote “Code Setting” process on “How to operate your
ceiling fan” Step 3 again.
Figure 31
Receiver
Antenna
9-Pin
Connector
Signal Wire
