Figure 24A
Figure 24B
Light Socket
11
4.
Connect the 2-pin connector from the socket
plate assembly to 2-pin connector from motor
assembly (Figure 21).
5.
Remove one of the three screws in the plate
assembly. Slightly loosen the remaining two
screws. Assemble the socket plate to the light
plate assembly using the two key slots.
Replace the third screw and securely tighten all
three screws (Figure 22).
6.
Insert light bulb into socket (Figure 23A).
6A.
Don’t install the light bulbs if you want to install
the lower steel cap in Step 7A ((Figure 23B).
7.
Assemble the glass bowl to the light plate assembly.
7A.
Assemble the lower steel cap to the light plate
assembly by twisting in a clockwise direction
(Figure 24B).
Securely attch the glass by twisting in a clockwise
direction. Do not over-tighten (Figure 24A).
CAUTION
To reduce the risk of fire, use 100-watt max. type
T4-minican JD E11 tungsten halogen bulb. Turn off
the wall switch and allow the bulb to cool for 10
minutes before relamping.
Bulb is pressurized and may shatter. DO NOT
TOUCH BULB WITH BARE HANDS. Fingerprints
may result in shorter bulb life. Remove fingerprints
with alcohol prior to use.
Motor Assembly
2-Pin
Connector
Socket Plate
2-Pin
Connector
Socket Plate
Assembly
Figure 21
Screws (3)
Figure 22
Socket Plate
100-WATT
Minican Light Bulb
Figure 23A
Figure 23B
Light Socket
Glass
Lower Steel Cap
Assembly
How to Assemble the Blades and Light Kit (continued)
