Fanani T.30, Руководство по сборке

Страница: 8 / 24

2b. Fixing
Guide spacer fixing
1) remove the holding plates with screws from the guide
spacer supports and insert them into the guide;
2) fix the guide spacer supports on the existing structure;
3) place the roller blind set on the existing structure;
4) insert the guides into the side supports;
5) fix the holding plates inserted into the guide to the
guide spacer
6) check the squaring
ATTENTION : in presence of led stripes, insert them
before placing the guides.
i
IMPORTANT:
BEFORE FIXING THE
GUIDE SPACER
CHECK THE
SQUARING
T.30
6
FANANI / ASSEMBLY INSTRUCTIONS
i
IMPORTANT: before proceeding with the wall (or ceiling) mounting supports setting, establish
their position.
1)establish the adjustable supports and proceed to set them. It is the installer
responsability to use suitable fixing anchors;
2) position the adjustable bracket on the wall at a distance of 10-30 cm from the box side head; fix it to
the wall.
3) remove the wall support stainless steel holding plate and insert it into the box;
4) place the roller blind set on the adjustable supports and fix them to the box with the specific screws;
5) fix the adjustable guide track support in the desired position;
6) insert the guides into the side supports;
7) loose the wall support screws in order to bring the guide to the right position;
8) remove the stainless steel holding plate from the guide
spacer, fix the guides to the
spacers ;
the right height of
adjustable
Fixing .2c
15
9
22
9
Flap
facing
upwards
Flap facing
downwards
1,5
0
Backmax.height
10 0 ~3
12
23
ceiling counter-bracket version
i
IMPORTANT:
PLACE THE BOX
GROUP AS PER
ILLUSTRATION.
(
TURN LATER)
Wall fixing with guide spacers adjustable
T.30
7 FANANI / ASSEMBLY INSTRUCTIONS
10 0 ~3