10. Limit switches re-programming with remote control
T.30
17
FANANI / ASSEMBLY INSTRUCTIONS
Limit switches re-programming with remote control .11
T.30
19
FANANI / ASSEMBLY INSTRUCTIONS
3)
UP LIMIT SWITCH
Press the
button to reach the top limit switch until the motor stops
automatically (bottom rail stops against the box).
UP
WARNING: KEEP PRESSED THE UP BUTTON WITHOUT RELEASING IT
TILL THE BOTTOM RAIL STOPS AGAINST THE BOX AND THE MOTOR
PERCEIVES THE OBSTACLE AND MEMORIZES THE LIMIT SWITCH
i
“STOC”
approx. 20cm
Fabric moving
2)
LIMIT SWITCH CANCELLATION
In rapid sequence press the
and
buttons (in this order); the
motor will confirm the operation with a
.
PROGRAM
STOP
DOUBLE CLICK
i
IMPORTANT: before cancelling the limit switches, make sure that the roller blind to be reset
corresponds to the selected channel (in case of multiple roller blinds)
“ c l i c k-
c l i c k ”
1)
PREPARATION
Bring the bottom rail about 20 cm far from the
box
Fabric stopped
i
IMPORTANT:
during setting the motor enters the “DEAD MAN”
mode:
The fabric automatically moves and stops by simply pressing and releasing the UP
or DOWN buttons without need to push the Stop button, is however possible to
reach the desired position even with micro-movements.
Once the program operation is finished the motor will start againg to move
automatically.
4)
FIRST DOWNWARD LIMIT SWITCH (HOOKING)
Press the
button and let the fabric descend until it has passed the
hooks (confirmed by a “
);
the DOWN button to
DOWN
CLAC” release
STOP
THE OPERATION; THE FABRIC MUST BE LOOSE
LESS
LOOSE
FABRIC
5)
SECOND DOWNWARD LIMIT SWITCH (UNHOOKING)
Press the
button and
when the fabric is loose
Then press in rapid succession the
and
buttons (in
this order) until the motor confirms the operation with a
.
DOWN
release it
WARNING: THE FABRIC MUST BE LESS LOOSER THAN THE FIRST
DOWNWARD LIMIT SWITCH, WHICH IS ESSENTIAL FOR
UNHOOKING.
PROGRAM
DOWN
CLICK
LOOSE
FABRIC
In rapid sequence press the
and
buttons (in this
order) until the motor confirms the operation with a
Then press the
button to reach the hook which will automatically
.
PROGRAM
DOWN
CLICK.
UP
TIGHTEN THE FABRIC
WARNING: LET THE FABRIC HOOKS DECISIVELY WITHOUT
RELEASING THE UP BUTTON, SO THAT THE MOTOR PERCEIVES THE
LIMIT SWITCH
i
6)
END OF SETTING
At the end of the procedure check that the fabric hooks and unhooks
automatically by using the remote control buttons.
“STOC”
“STOC”
“click”
“click”
“clac”
Содержание T.30
Страница 1: ...Rev 2 04 17 T 30 ASSEMBLY INSTRUCTIONS WITHRADIO SOFTWARE5 14 MOTOR...
Страница 2: ......
