Fanani T.30, Руководство по сборке

Страница: 16 / 24

8. Wall gasket
1) drill the slotted profile and set it to the
wall.
2) apply silicone on the wall side and
gasket side.
i
IMPORTANT:
IN THE VERSIONS WITH
MORE THAN ONE MODULE
DO NOT CUT THE GASKET.
T.30
14 FANANI / ASSEMBLY INSTRUCTIONS
Draughtproof profile .9
T.30
15 FANANI / INSTRUCTIONS ASSEMBLY
1) hook the bottom rail with the guide and bring it to top
i
IMPORTANT : THE RUBBER FLAP IS ALREADY INSERTED IN THE PROFILE
3) set the profile to the guide with the specific screws supplied
4) apply silicone as per illustration
profilo antispiffero .9
1) agganciare il profilo antispiffero alla guida ed infilarlo fino ad arrivare in battuta al cassonetto
i
IMPORTANTE: L’ALETTA IN GOMMA E’ FORNITA GIA’ INSERITA NEL PROFILO
2) once exceeded the bottom rail with the druaughtproof profile, turn the flap inward for its correct
positioning. (as per illustration below)
3) fissare il profilo alla guida con le apposite viti in dotazione
4) siliconare come da disegno
A B