Fanani T.30, Руководство по сборке

Страница: 12 / 24

4. Electrical connections and operational test (remote)
T.30
10 FANANI / ASSEMBLY INSTRUCTIONS
Electrical connections and operational test (switch) .5
T.30
11 FANANI / ASSEMBLY INSTRUCTIONS
i
IMPORTANT: if in that phase the fabric doesn’t result lightly
loose, reset the limit switches
PE
L
N
mains cables motor cables
blue
brown
green/yellow
blue
brown
green/yellow
black
myShell RC MOTOR
remote control operation
“STOC”
LOOSER
FABRIC
“clac”
“clac”
press the button and check that the fabric HOOKS properly DOWN
press the button and check that the fabric UNHOOKS properly UP
i
IMPORTANT: in case the fabric is not loose enough, reset
the limit switches
TIGHTENED FABRIC
i
IMPORTANT: the roller bind is assembled and tested in our prod.
dept. with pre-set limit switches; however the limit switches could
need to be reset due to small size differences in the fabric
“STOC”
LESS
LOOSE
FABRIC
remote control
1 channel
remote control
5+1 channels
stop
up
down
stop
up
down
Channels
channel
selector
i
IMPORTANT: if in that phase the fabric doesn’t hooks, check
the squaring and place the guides in the correct position
Program
button
Program
button
“STOC”
LOOSER
FABRIC
“clac”
“clac”
press the button and check that the fabric HOOKS properly DOWN
press the button and check that the fabric UNHOOKS properly UP
i
IMPORTANT: in case the fabric is not loose enough, reset
the limit switches
TIGHTENED FABRIC
“STOC”
LESS
LOOSE
FABRIC
i
IMPORTANT: the roller bind is assembled and tested in our prod.
dept. with pre-set limit switches; however the limit switch could need
to be re-set due to small size differences in the fabric
up
down
Program
button
Push button panel
PE
L1
N
mains cables motor cables
blue
black
green/yellow
blue
brown
green/yellow
black
brown
L2
myShell SWITCH MOTOR
operation through test cable with push-button panel
(definitive connection with pre-existing wall switch)
i IMPORTANT: if in that phase the fabric doesn’t hooks, check
the square and place the guides in the correct position
i
IMPORTANT: if in that phase the fabric doesn’t result lightly
loose, reset the limit switches