11. Limit switches re-programming with push button panel
(test cable)
T.30
18
FANANI / ASSEMBLY INSTRUCTIONS
10. Limit switches re-programming with push button panel (test
cable)
T.30
16
FANANI / FITTING INSTRUCTIONS
2-1) press
PROGR
button
2-2)
Keep pressed the
PROGR button and
at the same time
press the DOWN
button
2-3)
release the
PROGR button
but continue to
press the
DOWN button
2-4)
continue to press
the DOWN button
and at the same
time press the
PROGR button
The motor will
confirm the
operation with a
K.
DOUBLE CLIC
approx. 20
1)
PREPARATION
Bring the bottom rail to about 20 cm far from the box
3) UP LIMIT SWITCH
Press the
button to reach the top limit switch until the motor stops
automatically (bottom rail stops against the box).
UP
WARNING: KEEP PRESSED THE UP BUTTON WITHOUT RELEASING IT
TILL THE BOTTOM RAIL STOPS AGAINST THE BOX AND THE MOTOR
PERCEIVES THE OBSTACLE AND MEMORIZES THE LIMIT SWITCH
i
“STOC”
i
IMPORTANT:
during setting the motor enters the “DEAD MAN”
mode:
The fabric automatically moves and stops by simply pressing and releasing the UP
or DOWN buttons without need to push the Stop button, is however possible to
reach the desired position even with micro-movements.
Once the program operation is finished the motor will start againg to move
automatically.
Fabric moving
2)
LIMIT SWITCH CANCELLATION
“click-click”
Fabric stopped
4)
FIRST DOWNWARD LIMIT SWITCH (HOOKING)
Press the
button and let the fabric descend until it has passed the
hooks (confirmed by a “
);
the
button to
DOWN
CLAC” release
DOWN
STOP
THE OPERATION; THE FABRIC MUST BE LOOSE
“clac”
LOOSE
FABRIC
5)
SECOND DOWNWARD LIMIT SWITCH (UNHOOKING)
Press the
button and
when the fabric is loose.
Then press the
button until the motor confirms the operation
with a
.
DOWN
release it
WARNING: THE FABRIC MUST BE LESS LOOSE THAN THE FIRST
DOWNWARD LIMIT SWITCH, WHICH IS ESSENTIAL FOR
UNHOOKING.
PROGRAM
CLICK
LOOSE
FABRIC
Hold down the
button until the motor confirms the
operation with a
.
Then hold down the
button to reach the hook which will
automatically tighten the fabric.
PROGRAM
CLICK
UP
6)
END OF SETTING
At the end of the procedure check that the fabric hooks and unhooks
automatically by using the push-button panel buttons.
“STOC”
“STOC”
“click”
“click”
Содержание T.30
Страница 1: ...Rev 2 04 17 T 30 ASSEMBLY INSTRUCTIONS WITHRADIO SOFTWARE5 14 MOTOR...
Страница 2: ......
