4
2.1 Operation Precautions
When the main unit is stand upward, it will automatically shut down if there is no operation within
20 seconds.
When the appliance is operation, do not lift or move the main unit up or down.
Do not recline the main unit to one side or lay the main unit flat to prevent sewage from flowing
back into the motor and causing damage.
Do not recline the main unit more than 155° to protect against water leakage.
Do not use the appliance to clean the foamy liquids or corrosive liquids.
Do not put the toxic & corrosive detergent to clean water tank for Vacuum and Wash (Auto or Turbo
mode).
Place the main unit to base station after the operation. Empty the dirty water tank and fill the water
in the clean water tank to the recommend "Water Level" line before starting of self-clean process.
Charge the battery of appliance and ensure the minimum battery level (1 green LED light of battery
indicator is lighted up) is achieved before press the " " button to start the self-clean process.
After the self-clean process is completed, pour out the sewage from the dirty water tank and clean
the dirty water tank with detergent and cleaning brush. Empty the clean water tank also.
USE OF PRODUCT
5
2.2 First Time Installation
Install the base station
Place the base station against the wall and connect the power cord.
Install the main unit
Insert the handle into the fixed slot of the appliance in the vertical direction. A "click" sound indicates
that the installation is successful. Check that the handle is installed stably without loosening.
Align the Roller brush cover with the clips and install it on the brush head.
USE OF PRODUCT
Note
: Do not place the base station
near heat sources or damp areas such
as radiators, kitchens, or bathrooms
