8
Icon
Function / Indication
3 green LED lights lighted up = Full
2 green LED lights lighted up = ~ 67%
1 green LED light lighted up = ~ 33 %
1 red LED light lighted up = ~ 20% (place the main unit to base station for
battery charging)
1 red LED light flashing = Low Battery. The appliance will switch off soon
2.5
Operation
Power key (Long press time is one second, short press time is instant)
Function key (Short press to switch modes, Vacuum - Auto – Turbo)
Power On
:
Pick up the main unit from the base station, and the brush does not
work in a standing state. You are required to recline main unit, and
long press the " " button to power on the appliance. It enters the
vacuum mode and starts to work. Short press the " " key to switch
between three modes (Vacuum, Auto, and Turbo) cyclically.
Pause
:
After short pressing the " " key or tilting the handle forward to the
standing position, the main unit will temporary stop working. If
you recline the main unit, it will resume working automatically. It will
be automatically shut down if there is no operation within 20 seconds
in the standing state.
Shutdown
:
Long press the " " key to shut down.
USE OF PRODUCT
9
Auto & Turbo mode operation
If there is no water or the water level is very low in the clean water tank when it starts the operation, it
takes 5 seconds to detect the clean water level and then the Rear tank alert is flashing. After you refill
the water and re-install the clean water tank in place, short press the “ ” button and the operation
will continue.
If the sewage level is full and exceed the “Water Level” line in the dirty water tank in the operation, the
Front tank alert is flashing. The operation is continued after the dirty water tank is empty and re-install
in place.
One-button self-clean (Duration: ~27 minutes)
USE OF PRODUCT
Note:
self-clean process can only be started when the minimum battery capacity is 1 green
LED light of Battery indicator is lighted up
