12
3.1 Cleaning of Dirty Water Tank
Simple cleaning:
When the water level of the dirty water tank exceeds the
‘Water Level’ line, Front Tank alert is flashing, take out the
dirty water tank (refer to point 2.7). Pour out the garbage in
the wet and dry separator and pour out the sewage in the
dirty water tank, and then rinse the dirty water tank with
clean water.
3.2 Cleaning of Dirty Water Tank Filter
Remove the filter:
Hold the filter removal keys on both sides and lift the filter
up.
Use detergent to clean, rinse with clean water, and dry it in
an open area. Install the filter back in place after cleaning. A
soft-bristled cleaning brush can be used to assist in cleaning.
.
CLEANING AND MAINTENANCE
Note
: pour sewage and wet waste into the sink with
the anti-clogging filter plug to prevent the sewer from
clogging.
Note
: Do not use a stiff or wire brush to clean the filter.
Note
: After the filter has been used for a period of
time, it needs to be disassembled and replaced
according to the usage conditions. It can be cleaned
regularly, dried in an open area, and reuse. It is
recommended to replace the filter with a new one
every 3-6 months.
13
3.3 Deep Cleaning of Dirty Water Tank
Use tap water to rinse the dirty water tank and the wet and dry
separator on the top cover until it is clean. You can use the detergent
and cleaning brush to clean the dirty water tank, the wet and dry
separator, and the dirt level sensor.
CLEANING AND MAINTENANCE
Note
: If you find that the suction nozzle of the brush head is blocked or dirty, clean it up
in time. If the dirty water tank is not cleaned thoroughly, the Front tank alert will flash, even
if the dirty water tank is empty.
Note
: Clean the dirt level sensor also, the Front tank alert will flash even though the dirty
water tank is empty
