FAME DD-One Simon Philips Скачать руководство пользователя страница 4

Страница: 4 / 52

Safety instructions:

DANGER! (Possible hearing damage)

When speakers or headphones are connected, the unit may produce volu- me

levels that may cause temporary or permanent hearing loss. Do not operate the

unit continuously at high volume. Reduce the volume immedi- ately in case of

ringing in the ears or hearing loss. If necessary, reduce the volume directly at

the respective controller during initial operation.

DANGER! (For Babies and Children)

Wrapping, plastic foils and other packaging material must be properly stored

or disposed of. It should be kept out of the reach of babies and children due to

the risk of suffocation.

Ensure that children never use the device unattended! Also make sure that child-

ren do not remove any (small) parts from the device, as they could suffocate if

swallowed!

DANGER! (electric shock caused by short circuit)

Modi cations to the mains cable or the mains plug are prohibited. Failure to do

so may result in re or death hazard due to an electric shock!

Warning! (Service Conditions)

Due to its structural characteristics, the device is designed for indoor use. Do

not expose the device to rain, moisture or liquids, as this can cause damage.

Vibrations, dirt or sunlight can also lead to damage, avoid them!

Warning! (Power Supply)

Make sure that the device voltage matches your local mains voltage. It is stron-

gly recommended to protect your mains socket with a residual current circuit

breaker (RCD).

If you do not use your device for a longer period of time, disconnect the device

from the mains to minimize dangers. The same applies to thunders- torms or

oods, etc.

Warning! (Fire Hazard)

Make sure that the device is not exposed to any direct heat source and is used

away from open re. Never block or cover ventilation slots or the device itself.

Содержание DD-One Simon Philips





















































Результаты поиска

Содержание DD-One Simon Philips

Отзывы:

Похожие инструкции для DD-One Simon Philips

Бренды по названию

Популярные бренды

FAME DD-One Simon Philips, Руководство пользователя

Результаты поиска

Содержание DD-One Simon Philips

Отзывы:

Похожие инструкции для DD-One Simon Philips

Бренды по названию

Популярные бренды