FAMC Mini Скачать руководство пользователя страница 84

Страница: 84 / 98

connected), the selection of MIDI Channels can be done with

common names.

Further, there are several RESERVED names that have

alternate functionality. “AXE-FX” should be used if an AXE-FX

Ultra is connected to the midi channel. “AXE-FX2” should be

used if an AXE-FX II is plugged in. This is used for Auto-Load

and Direct Control mode. “ECLIPSE” should be used if an
eventide is plugged in. For these reserved names, the Program

Change system will automatically handle bank selection for

you.

There are two mode of operation for BANK, PRESET, SONG,

SET-LIST and PAGE UP/DOWN commands. By Default,
“Follow User Change” is selected, which will update the

current value of these Button functions when user changes

are made (preset selection, midi programming, etc…).

When set to “Independent Scroll”, each of these button types

will remain independent from any other input. Changes made

to these buttons will be triggered when a Scroll trigger or a

“SELECT/ENTER” trigger is encountered. This provides the
ability to “ARM” banks, songs, set-lists, pages and presets.

This defines the Active color for Presets. When a Preset is

currently selected, it will be displayed with this color.

This defines the inActive color for Presets. When a Preset is
currently not selected and active, it will be displayed with this

color.

MIDI Chan Names
01 | [MIDI -01]

Special CMD Scroll
Independent Scroll

Pre Active Color
Purple (Dim)

Pre InActive Color
Purple (Bright)

Содержание Mini



































































































Результаты поиска

Содержание Mini

Отзывы:

FAMC Mini, Руководство пользователя, Страница: 84 / 98

Результаты поиска

Содержание Mini

Отзывы: