FAMC Mini, Руководство пользователя, Страница: 36 / 98

36
are processed and no other changes are made to the current status of each IA-Slot. This has many uses,
but can also expand the number of temporary IA-Slots available for special functions (MUTE/UNMUTE
ALL, etc…)
Act as a
Momentary Preset
Tells this preset to trigger, and stay active as long as the user is holding down the preset button. As
soon as the user releases the button, the LF+ will go back to the previously active preset. This can be
useful in many applications, MUTE, SOLO, and so on… To use this feature, the Preset holder itself must
be the only function on the button assigned. And the Global “Block Preset Save” parameter MUST be
turned ON.
Default Page By default, the Presets are set to Use Currently Active page. This means the triggering of the preset will
NOT change. Any other setting will force the currently active page to change and match the setting.
IA-Slot MAP Each Preset can have a defined IA-Map associated with it. Normally you will leave this to 001, which
assigns IA-Slots #1-#60 of the preset to IA-Slots #1-#60 of the system.
Send as Bypass for
Initial Blocked
States
If you set an IA-Slot to initially “Blocked” status, then when this parameter is turned ON, the LF+ will
process BYPASS commands for the IA-Slots and then ignore the IA-Slots from that point forward for the
given preset.
Enable External
Device Sync on
IA’s
If a given IA-Slot has an external sync effect assigned to it, this parameter will allow this preset to
process it in real-time. For instance, if using a Kemper or AXE-FX, turning this parameter on will force
the LF+ to actively get the current status of the preset in the effects unit and ignore the Initial States
programmed in the preset itself.
Use External Sync
Preset Name
when Available
If a preset triggers a sync’d device and the external preset name is provided, then it will be displayed
instead of the assigned preset’s name.
Remember Last
step If the preset has defined steps, you can have the LF+ remember the last step used, and upon returning
to the preset, it will start where you left off.
Page Button Start
Value
A preset can define which virtual button to place on physical button #1. This allows a preset to define
what starting button on a page to assign to the first physical button. You can use this capability to
create virtual pages within an actual page (perhaps a looper “page”, an effects page, and so on)
Step Names Used to assign easily readable labels within the programming command section. Also displays these
step names on the buttons themselves as the steps are activated
Command
Programming
Commands are processed in the order entered. Processing stops when the system sees the first EMPTY
command, or a STOP command.
IA Labels IA-Slots can be assigned an IA-Label # from 1-10. When presets are triggered, the unique label for the
active Preset will display on the buttons. On an Axe-FX as an example, instead of calling it SCENE 1, the
button could display “WET DELAY” for one preset, and “LOUD SOLO” for another, and so on…
INITIAL IA-
STATES BUTTONS
You use the 60 “balls” to set the initial state of each IA-Slot used in the preset. Choices are OFF, ON,
BYPASS, or BLOCKED.