FAMC Mini Скачать руководство пользователя страница 61 | Manualshive

Страница: 61 / 98

FAMC Mini Скачать руководство пользователя страница 61

61

Edit the nick name following the User Guide section on “Editing Names”. Nick names are used in various menu system

prompts, as well as displayed at various times on the LCD displays of page buttons. Nick names will also be used in

certain special commands.

On the Top right of the Controller there are two STATUS indicators. Pages have the ability to set the color of STATUS

indicator #1. When the currently edited page is activated, it will force the indicator to the color defined in this
parameter. (See the section on selecting colors for descriptions).

Normally, pages control the function assignment of buttons based on the parameters (toggle mode) for a particular

button. This works for most system setups with commands, special functions and presets. IA-Slots are special function

types in the LF+ as it may be desired to have a single button automatically sense what function it should process and
automatically change its function for you. This is very powerful and saves the user enormous amounts of time in special

programming as well as avoiding the need to create multiple pages for basic auto-toggle behaviors.

Dynamic IA-Slots parameter when turned on, tells the page to re-evaluate its function every time a new preset is
activated. Using data found in the Initial IA-States for that particular preset, the Dynamic system can determine which

function should be available immediately without the user having to press to toggle the function.

There are many uses for this, but lets look at a simple example. Lets assume your rig has a chorus and flanger effect.

Now normally these two effects would never be used on the same preset, as putting a flanger and chorus together
wouldn’t sound very good. Again, just an example. So we know we will have some presets with the Chorus enabled, and

others with Flanger effect. Now lets assume our presets have the initial IA-States for each preset set so that when a
Chorus is in the preset, it is either set as Bypassed, or ON, and since there is no flanger, the flanger IA-Slot is set to OFF

as the initial state. Further, lets assume other presets have the opposite settings, the Flanger is set to ON or BYPASS,
and the chorus is set to OFF. If Function #1 on a button is Chorus IA-Slot, and Function #2 is the flanger IA-Slot, and

Dynamic IA-Slots is turned on, then the Page will now change the button for you as you switch presets.

Those presets with a Chorus- will automatically make the button process the Chorus IA-Slot. And the presets with a
flanger will automatically switch the button immediately on its own so that the button will control the flanger. Think of

Status #1 Color
OFF

Dynamic IA-Slots
NO

«
...
59
60
61
62
63
...
»

Содержание Mini



































































































Отзывы:

Нет отзывов