FAMC Mini, Руководство пользователя, Страница: 50 / 98

50
If you have a preset that has steps, and you need this preset to remember over time what the last step used was, then
set this parameter to YES. By default this setting is no, which means that when you first press on a preset, it defaults to
STEP1, then Step2, etc… If you change presets and then come back to this preset, it will again start at STEP1. If you set
the preset to “Remember”, it will automatically trigger the next STEP from where you left off last time you pressed the
PRESET.
If a preset will utilize STEP commands, then you can create custom names that will show up on the main LCD, and will
also show on the button LCD for the preset. This will come in handy should you have for instance a preset that triggers
a delay effect with 0%, 25%, 50% and 75% mix values. In this example, perhaps your step names would be “DLY: 0%”
for Step 1, “DLY: 25%” for Step 2, “DLY: 50%” for Step 3 and “DLY: 75%” for Step 4. The display will tell you what step
you are on as you press the preset. Good labeling goes a long way to keep things simple while you’re playing.
Step Remember
NO
Edit Step Names
1:[Step#001] Edit Step Names
2:[Step#002] Edit Step Names
3:[Step#003]
Edit Step Names
4:[Step#004]