FAMC Mini Скачать руководство пользователя страница 22

Страница: 22 / 98

EDITING NAMES

Presets, Songs, Set-Lists, IA-Slots, Pages and Sysex messages allow the entry of long names (16 characters), and nick names (8

characters).

Use the

and

buttons to pick the letter position, and use the

and

buttons to select the letter. Holding

key will begin a fast scroll. Let go of the

button and press again to slow scroll. All but the JR+ allow you to Press

to jump from [SPACE] to “A” to “a”. Hold

for 2 seconds and let go and the entire name will be cleared. Pressing

will restore the last saved name in case

you want to begin editing from the start again.

PROGRAMMING COMMANDS

Presets and IA Slots can hold up to 20 programming commands, while songs can have up to 10 commands. A programming

command is either a MIDI command (Note On, Note Off, CC#, PC#, Pitch), or a specific Special Command. Each command may
have 0-2 parameters. The display will prompt you to enter such information.

The remainder of this section will show the LCD screen as if we were programming a Preset, but the entry of programming

commands for IA Slots and Songs is identical. The exception will be that Songs can not process STEP commands and will ignore
them if found.

MAIN: [SEL] Function
Sysex

SCROLL LEFT

SCROLL RIGHT

DOWN

Содержание Mini



































































































Результаты поиска

Содержание Mini

Отзывы:

FAMC Mini, Руководство пользователя, Страница: 22 / 98

Результаты поиска

Содержание Mini

Отзывы: