FAMC Mini, Руководство пользователя, Страница: 25 / 98

25
Command
Type # Command Name
# of
Params Description
0
EMPTY
0 Signifies that no command is placed in the current Programming Message
1 MIDI COMMAND 1-2 A standard MIDI Command will be programmed (CC#, PC#, NOTE ON/OFF,
etc..)
2 G-TUNER 1 Puts the controller into TUNER DISPLAY mode
3 STEP 0 Tells the controller that we are beginning a step (or another step) and will
process all the following commands until (1) another step is reached, (2) end
of programming
4
SYSEX SEND
1 Sends a SYSEX message—and will process all linked SYSEX messages as well
5 DELAY (MS) 1 Will delay processing by [x] milliseconds before continuing the processing
6
LAST PRESET
0 Will jump to the last Preset used prior to currently selected preset
7 LAST PAGE 0 Will change the Active Page to the LAST PAGE prior to the currently active
page
8
CHANGE PAGE
1 Will change the Active Page to the selected Page
9 PRESET TRIG 1 Will immediately trigger another preset after completing the current
processing
10 IA ON TRIG 1 Will change and trigger the selected IA Slot to the ON state and process it
11 IA OFF TRIG 1 Will change and trigger the selected IA Slot to the OFF state and process it
12
IA TOGGLE
1 Will Toggle the state of the selected IA Slot and then process it
13 SET COLOR 1 Will change the Physical Button (if mapped) to the specified color
14 STORE PRESET 1 Will Store the Current Preset # into a memory location (1- 4)
15 RECALL PRESET 1 Will recall and process the preset # which is stored in memory located (1-4)
16
TRIG 1st BP
0 Will immediately trigger the first preset in the currently selected bank
17 GO GLOBAL 0 Jump to the defined Global Page
18
EXP PDL CC
2 Override the CC# of an expression pedal (1-4), (CC#)
19 EXP SEND VAL 2 Select Expression pedal, and force the sending of value defined
20
EXP SEND CUR
1 Send the current expression pedal value of pedal (1-4)
21 IA Resend 1 Resends a specific IA-Slot defined (1-60)
22
EXP PDL MIDI
2 Allows you to override Exp Pedal Port (1-4) with a new Midi Chan # (1-16)
23 Sys SnapShot 0 Will store the current state (preset, song, etc…) like a camera. Restore later.
24
Sys Restore
0 Takes a previous Snapshot (command 23) and restores back to snapshot