FAMC Mini, Руководство пользователя, Страница: 65 / 98

65
Button will toggle IA Slot #001 when pressed
Normal press will trigger a Preset UP command, while holding
the button will trigger a preset DOWN command.
There is no limit to how many times a single function, preset, IA Slot or Page change function can be used.
Multiple instances of the same function will basically act like a “clone” of each other. All buttons will behave the
same way and display the same information.
Each button has three (3) behaviors that can be programmed. You can access them by continuing to press
through all of the editing parameters:
Parameter #1
By default, a button is set as a Trigger only. Simply put, if two functions exist on a button, and the second
function is triggered, it will process the 2
nd
Function, but will not change the physical layering. Only the
information and state of the 1
st
Function is visible. When “Toggle 1 & 2” is selected, then Function #1 and #2 will
switch with each other when the 2nd
Parameter #2
By default, if only one function is defined for a button, it will start processing as soon as the user pressed
the button. By setting this parameter to “Wait for Release”, the controller will not trigger the Function
until the user lets go of the button. This will allow a user with a “sticky foot” to just stand on the button
until they are ready, and release the button to trigger. This could be useful in time sensitive preset
01> 1:001:Reverb 1
S|01|2:Not Defined
01> 1:PRESET UP
F|05|2:PRESET DWN
SCROLL RIGHT
01> 2nd Button Type
On Hold:Trigger Only 01> 2nd Button Type
On Hold:Toggle 1 & 2
01> Button Release
Process on Press 01> Button Release
Wait for Release