ming mode. The LED’s can be programmed to display other light sequences, see section
Pro-
gramming
for more information.
The ECII™ Flex can be mounted behind the car operating panel (COP), on the panel with a
small front plate and frame or with a larger front plate and frame with an integrated alarm button.
The connection of the ECII™ Flex requires a two-wire cable to the alarm button in the lift. A
two-wire cable for connecting a standard analogue telephone line, use two unused wires in the
existing car cable is available. It is very important that the cable is fastened properly. For the
separate suspension cable there is a special mounting kit available, which includes the neces-
sary mounting parts.
Multiple ECII™ Flex connection
The FältCom ECII™ Flex is designed to run on the existing telephone line power supply. Sep-
arate power supply is only required if several lift phones are connected to the same telephone
line or if the line voltage is below 25 VDC. See more under section
Technical data
.
Several lift phones may be connected to the same telephone line. When one of the lift phones
has established a connection, the other ones will not be able to use the line; a busy tone will
instead be heard in the loudspeaker and the yellow LED will flash five times. When the line
becomes free, the alarm call will be connected automatically.
Every ECII™ Flex requires a unique number on the line and the default number is 1. The num-
ber is used when calling in to the ECII™ Flex. The unit with number 1 will answer the call and
162187 Manual FältCom ECII™ Flex
Page 7 of 40