Fält Communications AB reserves the right to determine if the product will be repaired or re-
placed. Warranty ceases to be valid if defects occur due to incorrect use, or other method of
application, or context than specified in this manual.
ECII™ Flex should only be used in the context for which it is intended. All other forms of usage
will be considered as being solely at the user’s own risk. Only suitably qualified persons are
permitted to install, program and start-up this product. Start-up is only allowed after the product
has been properly installed. As a consequence Fält Communications AB declines all liability for
possible defects, operational disturbance, accidents etc. caused by lack of knowledge or care-
lessness on the part of the user. The same principle is valid for all unauthorized changes made
to the product.
Fält Communications AB reserves the right to make changes to the product for functional or
commercial reasons. The company is not obliged to make immediate updates to reference
manuals.
10 Updates
Visit our web site to access the latest updates regarding market information and technical doc-
umentation.
http://www.faltcom.se
11 Repair return procedure
Fält Communications AB only accepts returns which are accompanied by a completed Service
Card, which can be found in the section
Service form.
This form can also be downloaded from
our web site. If the product has been purchased from one of our distributors the buyer must first
contact the distributor concerned for assistance.
All returns must be sent well packed with freight pre-paid to this address:
Fält Communications AB
c/o BL Elektronik AB, Service
Furuhedsvägen 29D
SE-952 31 KALIX, Sweden
Repaired products are sent back to customers as a regular post parcel with freight paid on the
assumption that the product is covered by warranty. If the investigation shows that the returned
product has no defects the customer is charged a service fee and freight. The customer can
ask for a quotation for repair of product not covered by warranty.
162187 Manual FältCom ECII™ Flex
Page 37 of 40