Falltech SRD, Руководство пользователя, Страница: 5 / 23

091415
7. INSPECTION
7.1 Pre ‐ Use Inspection: Perform an inspection before each use in accordance with the Guideline for SRD Inspection. See Table 3. See paragraph 7.4.
7.2 Inspection Frequency: OSHA 1910.66, OSHA 1926.502, and ANSI Z359.14 require an inspection by the Authorized Person before each use. In addition,
an inspection by a competent person at regular intervals is required. The competent person will determine the proper inspection interval based on use and
conditions.
7.3 Guide for SRD Inspection: Use the guide provided to inspect the SRD. See Table 3. See Figure 6 for examples of cable damage.
7.4 Inspection Results: If an inspection reveals defects in or damage to the equipment, inadequate maintenance or activated fall indicators, mark the unit
as “UNUSABLE” and remove it from service. Contact FallTech for options.
7.5 Inspection Document: Record inspection results on the Inspection Record provided in Appendix B, or on a similar document.
8. LABELS: The following labels must be present and legible.
5