FALK QUADRIVE JF, Руководство пользователя

Страница: 39 / 52

Modifications For Non-Standard Mounting Position s
Instructions
For non-standard mountings, modify drives as illustrated below
and on Page 40 to assure satisfactory lubrication. For
applications that exceed the limits shown, for drives that are
both rotated AND tilted and for drives with backstops, consult
Falk.
NOTE:
For Size 4608, refer to Falk.
CAUTION :
Inadequate lubrication will cause damage.
When replacing a pipe plug (P) with a street elbow (E), insert
the plug in the elbow (E/P). When replacing a pipe plug (P) with
a street elbow (E), pipe nipple (N) and a pipe cap (C), discard
the pipe plug. Kits consist of parts for an oil expansion
chamber. Pipe fittings and kits tabulated on Page 40 are
available from Falk. Pipe fittings may also be purchased locally.
Use galvanized pipe fittings.
Remove all pipe plugs and coat them and the added parts, with
Permatex #3D or equivalent to prevent leakage. Install parts as
illustrated to suit the mounting position. The air vent must be in
the top of the drive or in the kit standpipe. Fill drives with oil to
the level indicated by the letter “L” in the following drawings.
The Falk Corporation, P.O. Box 492, Zip 53201-0492
378-102
3001 W. Canal St., Zip 53208-4200, Milwaukee, WI USA Telephone : 414-342-3131 August 2004
Fax: 414-937-4359 e-mail: falkinfo@falkcorp.com web: www.falkcorp.com Supersedes 6-92
®
a good name in industry
Quadrive Shaft Mounted Drives
•
Appendix F
Sizes 4407/M4407-4608/M4608 (Page 39 of 52)
10 to 20° Clockwise Rotation 10 to 20° Counterclockwise
L
L
L
L
L
L
L
L
Standard Drive Mounting
Limits
The 10° Max rotation illustrated at the left
applies to standard 3, 6, 9 & 12 o’clock
mountings. For higher limits, follow the
instructions at the left and the drawings
below. (6 o’clock illustrated)
CODE
B — Reducing Bushing
N — Nipple
C — Cap P — Pipe Plug
E — Street Elbow STD — No Modifications
L — Oil Level
Q
This oil level applies when only a
street elbow with a pipe plug is
used.
±10 MAX. °
ROTATION
CCW
CW
4407 = .750 E/C & .750 x 3.00 N
4415 = 1.250 E/C & 1.250 x 3.00 N
4507 = 1.250 E/C & 1.250 x 3.50 N
3 O’Clock — CCW Rotation
6 O’Clock — CCW Rotation
4407 = KIT 738471 & .750 x .500 B
4415 & 4507 = KIT 738471 & 1.25 x .500 B
3 O’Clock — CW Rotation
6 O’Clock — CW Rotation
9 O’Clock — CW Rotation
4407 = .750 E/C & .750 x 1.375 N
4415 & 4507 = 1.250 E/C & 1.250 x 1.625
9 O’Clock — CCW Rotation
4407, 4415 & 4507 = STD
4407 = .750 E/C & .750 x 1.375 N
4415 & 4507 = 1.250 E/P
4407 = KIT 738471 & .750 x .500 B
4415 & 4507 = KIT 738471 & 1.25 x .500 B
12 O’Clock — CW Rotation
4407 = .750 E/C & .750 x 1.375 N
4415 & 4507 = 1.25 E/C & 1.25 x 1.625
4407, 4415 & 4507 = STD
12 O’Clock — CCW Rotation
Horizontal Drive Modifications for 10 to 20°
Drive Rotation