Falcon i91104C, Инструкция для пользователя, по установке и обслуживанию

Страница: 4 / 42

4

These instructions are only valid if the country code appears on the appliance.
If the code does not appear on the appliance, refer to the technical instructions
for adapting the appliance to the conditions for use in that country.

Installation must meet national or local regulations. Attention must be paid to:
safety (installation & use) regulations, health and safety at work act, local and
national building regulations, fire precautions act.

All apparatus connected to a potable water network and including water drain
device has to be provided with an air break before its discharge to the
drainage system. Type AA.

To prevent shocks, all appliances must be earthed.

This equipment is for professional use only and must be used by qualified
persons.

The installer must instruct the responsible person(s) of the correct operation
and maintenance of the appliance.

Unless otherwise stated, parts which have been protected by the
manufacturer must not be adjusted by the installer.

Take care when moving an appliance fitted with castors.

The appliance must be serviced regularly by a qualified person. Service
intervals should be agreed with the service provider.

“Check that no damage has occurred to the appliance, power cable and plug
top during transit.

If damage has occurred do not use the appliance.

Installation, periodic testing, repair and fixed wiring connections should only
be undertaken by a competent electrician

Ensure that the mains power cable is routed free from the appliance to avoid
damage.

We recommend supplementary electrical protection with the use of a residual
current device (RCD).

The appliance has been designed and approved to use Falcon kick plates;
non Falcon kick plates could potentially adversely affect the performance of
the appliance by restricting the air to the appliance.