Falcon i91104C, Инструкция для пользователя, по установке и обслуживанию

Страница: 34 / 42

34
11 Initialisation Error
Reset Appliance
Switch Appliance OFF for 10
Seconds then On.
Software Failure while initialising
hardware
Wait. The generator will reset
every 30 seconds.
Replace Generator.
12
Current Reading
Failure
Reset Appliance
Switch Appliance OFF for 10
Seconds then On.
Generator suspects Current
being generated does not reflect
what appliance controls are set
for.
Check Mains Supply
Check all electrical
connections within appliance.
Replace Suspect Coil
Replace Generator.
13
Mains Connection
Error
Reset Appliance
Switch Appliance OFF for 10
Seconds then On.
Mains voltage too high or too low See Fault 8
14
Mains Connection
Error
Reset Appliance
Switch Appliance OFF for 10
Seconds then On.
Mains voltage too high or too low See Fault 8
15
Coil Electrical Circuit
Self-Protected.
Reset Appliance
Switch Appliance OFF for 10
Seconds then On.
See Fault 4 See Fault 4
O1 Oven will not operate No power to unit
Check oven zone (element
selector) switch is on, turn
temperature up
O2 Oven will not operate Safety stat tripped Call engineer
O3 Oven slow to heat Wrong element setting
Check element selector(oven
zone) switch
O4 Oven slow to heat Faulty element Call engineer