Lumina 17
Installer
31
6.2.3
Settings cooling control
INSTALLER
HEAT COOL HUM,
tab page
Cool
Description
Setting of the name of the function.
Temp. inputs
Setting the addresses of the analog inputs. If the temperature sensors have not been
assigned, the control computer will use the house temperature.
Output address
Setting for the analogue output address (choice
LINEAR
) or relay output (choice
RELAY
).
Relay type
Setting of the type of relay control.
ON/OFF
or
MODULATING
.
Evaporative cooling
Setting indicating if evaporative cooling is used (NO, YES or DRIP)
6.2.4
Settings humidity
INSTALLER
HEAT COOL HUM
tab page
Humid
Description
Setting of the name of the function.
Output address
Setting for the analogue output address (choice
LINEAR
) or relay output (choice
RELAY
).
Relay type
Setting of the type of relay control.
ON/OFF
or
MODULATING
.
