Lumina 17
Installer
25
Position %
Readout of the ventilation percentage at which fans should activate/deactivate and air
inlets open/close. The ventilation percentages must increase from the lowest to the
highest position.
Cap m³/h
Setting of the ventilation capacity (m3/hour) for all positions used. If ventilation is used in
m3/hour/animal, always fill in this column!
6.1.2
Ventilation – Settings
INSTALLER
VENTILATION
SETTINGS
tab page
Miscell.
Combi-control
Setting of the speed of progression to the next or previous position in the combi-table.
Choose from
SLOW
/
MODERATE
/
FAST
.
Select
SLOW
if the transitions follow too quickly in succession. If it takes too long before
the control computer proceeds to another position select
FAST
.
Centr.vent.
Setting for using central inlet or central exhaust.
INSTALLER
VENTILATION
SETTINGS
tab page
Cont. part
Description
Setting of the name of the function.
Output address
Setting of the analog output address.
Extra analog
Setting of the analog output addresses of the control part.
Extra relays
Setting of the digital output addresses of the extra fans.
Position wind side
Setting of the compass positions, which represent the wind side of the house. If the wind
comes from this direction (positions), the ventilation control may be influenced.
Position lee side
Setting of the compass positions, which represent the lee side of the house. If the wind
comes from this direction (positions) under wind side, the ventilation control may be
influenced.
