FTG Series Programming Manual
_________________________________________________________________
１４
Command syntax: *OPC
Parameter: None
Query syntax: *OPC?
Returned parameter: <NR1>
Related commands: *TRG
*WAI
*PSC
It determines to save or not for the Service Request Enable Register and Standard Event
Enable Register at the moment when PSU is powered on.
1: Not save. When powered on, the PSU will clear the Service Request Enable Register and
Standard Event Enable Register.
0: Save. When powered on, the data will not be cleared.
Command syntax: *PSC <bool>
Parameter: 0 | 1
Usage example: *PSC 1
Query syntax: *PSC?
Return: OFF | ON
（
return *PSC current status
）
Related commands: *ESE, *SRE
*RST
Reset Command. Restores the PSU to its initial factory default state.
Command syntax: *RST
Parameter: None
Returned parameter:
无
Related commands:
无
*SRE
Sets or queries the Service Request Enable register. The Service Request Enable register
determines which bits of the Status Byte register are able to generate service requests.
The RQS bit of the Status Byte Register will be set “1” when the same bit are “1” for both
Status Byte Register and Service Request Enable Register.
Command syntax: *SRE <NR1>
Parameter: 0
～
255
Query syntax: *SRE?
