Fagor QC-PDS, Оригинальное руководство пользователя

Страница: 8 / 36

QCQR-8/36 Q uer C us - Power Drive System. Q uick R eference. Ref.2003
The main purpose of the QC-APS-15 is to supply the
+24 V DC required to feed the control circuits of the QC-
PS-045 main power supply as well as those of the QC-
DR-
 -F  drives and other equipment connected to the
DC BUS.
The main purpose of the QC-APS3-15 is to supply the
+24 V DC required to feed the control circuits of the QC-
PS-045 main power supply as well as those of the QC-
DR-
 -F  drives and other equipment connected to the
DC BUS, gently start the QC-RPS-  -F  main power
supplies using its soft-start circuit and protect the motor
against voltage spikes through its snubber circuit.
NOTE.
It does not come with a soft-start
circuit or a snubber circuit.
Characteristics
plate
A20
Version/model
label
D1|D2|D3
RESET.
Auxiliary power supply
initialization button
A17
A18
Ground bolt, M5.
Tightening torque:
3 N·m
QC-APS-15
SIZE |0.
Width: 39 mm
A18.
+24 V DC output
A17.
(+/-) DC BUS
Opening
and closing click cover
with bottom pivot hinge
Status indicator LED's
 Associated with the +24 V DC voltage
Connector Function
X33
Not available
A17
(+/-) DC BUS terminals under lid
A18
+24 V DC 15 A electric power supply output
A20
Terminals L1, L2, L3, FE ( F unctional E arth)
Three-phase power input to the auxiliary power supply
Leds Color Function
Red Amber Green
D1
ON
x x
Over-voltage
D2
ON
x x
Over-current
D3
x x ON In the presence of +24 V DC
WARNING.
The DC BUS discharge period may extend for up to
10 min after the equipment has been disconnected from the
electrical mains. For this reason, always ensure that there is no
voltage in the DC BUS before handling the equipment.
A18.
+24 V DC output
A17.
(+/-) DC BUS
Status indicator LED's
 Associated with the +24 V DC voltage
Connector Function
X33 Activating the system soft-start
A17
(+/-) DC BUS terminals under lid
A18
+24 V DC 15 A electric power supply output
A20
Terminals L1, L2, L3, FE ( F unctional E arth)
Three-phase power input to the auxiliary power supply
Leds Color Function
Red Amber Green
D1
ON
x x Over-voltage
D2
ON
x x
Over-current
D3
x x
ON In the presence of +24 V DC
WARNING. The DC BUS discharge period may extend for up to
10 min after the5 equipment has been disconnected from the
electrical mains. For this reason, always ensure that there is no
voltage in the DC BUS before handling the equipment.
X33
A17
A18
A20
Ground bolt, M5.
Tightening torque:
3 N·m
D1|D2|D3
Characteristics
plate
RESET.
Auxiliary power supply
initialization button
Version/model
label
Opening
and closing click cover
with bottom pivot hinge
QC-APS3-15
SIZE |0.
Width: 39 mm