Fagor FXM1 Series, Руководство по установке

Страница: 31 / 174

   General concepts
GENERAL CONC
E
PTS
In
sta
llatio
n
1.
Ref.2105
· 31 ·
FXM|FKM
SERVOMOTOR
Incremental TTL encoder
Optical disk used as position detector coupled to the rotor shaft with a
square TTL signal of 2500 pulses per turn.
It is connected to the drive through a 17-pin male Conninvers TM connector
that meets the sealing standard IP 65. The connection cable is identified
with the reference IECD-

and it is a cable with overall shield. All
FXM/FKM motors with F (220 Vac) winding can have a incremental TTL
encoder.
Series Encode reference
FXM1/3/5/7 I0 2500 ppv
FKM2/4/6/8 I0 2500 ppv
Note. The connection base for incremental TTL encoder (ref. I0) shown
in the following figures are viewed from the motor end.
T- 1/20 Base of connector IOC-17 on FXM/FKM motors.
Pin Signal Meaning
A A A signal output
B
A
Complemented A signal output
C
+5 Vdc Supply voltage
D
GND Ground
E
B B signal output
F
B
Complemented B signal output
G
Z Z signal output
H
Z Complemented Z signal output
I
TEMP -
Motor
temperature sensor
J
TEMP +
K
Ucm U signal output
L
Ucm
Complemented U signal output
M
Vcm V signal output
N
Vcm
Complemented V signal output
O
Wcm
W signal output
P
Wcm
Complemented W signal output
CH
SH+CH
Shield wire
chassis
Note. The letters must be interpreted as positions when looking at the
front of the unit.
Incremental I0
(on FXM/FKM)