Fagor FXM1 Series, Руководство по установке

Страница: 106 / 174

   3-phase servomotors. FKM
3.
3-
PHASE SERVOM
O
TORS. FKM
Ro
ta
ry con
nectors
172
· 106 ·
Ref.2105
FXM|FKM
SERVOMOTOR
3.5 Rotary connectors
FKM1 series
In the FKM1 series, the power connector and the feedback connector are
built into the end of the cables leaving through the gland from the
servomotor itself. The approximate length of these cables is 1 m. For this
series, it is not appropriate to consider rotating connectors.
FKM2/4/6/8/9 series
On the FKM2/4/6/8/9 series, the power connectors and those of feedback
signals may be rotated making it easier to connect the cable when the
installation conditions so require. The possible rotating angles are:
WARNING.
Do not remove the locking screws of any connector.
F- 3/5
Connectors on the end of the cables leaving the servomotor through the
gland.
F- 3/6
Rotary connectors.
Connector SERVOMOTOR Amax Hmax
Power ·1· FKM2/4/6 150° 180°
Signal ·2·
FKM2 150° 180°
FKM4 115° 110°
FKM6 110° 105°
Note. Certain positions cannot be reached
by rotating with the based mounted.
Approx. max. rotating torque. 8 N·m
Only 5 rotations are allowed in order to
keep the degree of protection.
Connector SERVOMOTOR Amax Hmax
Power ·1·
FKM8
200° 110°
FKM9
200° 110°
Signal ·2·
FKM8 110° 105°
FKM9 110° 105°
Note. Certain positions cannot be reached
by rotating with the based mounted.
Approx. max. rotating torque. 8 N·m
Only 5 rotations are allowed in order to
keep the degree of protection.
H
A
H
A
(1)
(2)
H
A
A
H
(1)
(2)
MANDATORY.
Do not try to exceed the indicated rotating angle values. We recommend
to rotate both connectors only when necessary and very seldom.
Remember that the more often it is rotated the less torque will be needed
to rotate it.