Fagor 8025 M CNC, Перевод оригинального руководства

Страница: 33 / 180

Remote modules.
CNC 8060
CNC 8065
RIO70
REMOTE MODULES. (C
ANFAGOR PROTOCOL).
3.
·33·
(R
EF
: 1906)
3 RIO70 REMOTE MODULES. (CANFAGOR PROTOCOL).
Remote modules may be used to have an additional number of digital and analog inputs and
outputs (remote I/O) that, distributed at different points of the machine or mounted in the
cabinet, permit controlling various devices of the machine. The remote modules are
distributed by groups (nodes) and are connected to the central unit through the CAN bus
that can have up to 32 nodes, including the central unit and the keyboards. The following
elements may be available with RIO70 series modules.
Fagor remote modules, RIO70 series, available for CAN bus with
CANfagor protocol.
There are full-size modules (those occupying the whole box) and half-size modules
(occupying half the box). Two half-size modules may be mounted in a box. Each group may
have up to 5 complete modules depending on consumption. See
"3.2 Consumption of the
remote modules" on page 37.
D I S C O N T I N U E D
Type of input/output Amount.
Digital inputs. 1024
Digital outputs. 1024
General purpose analog inputs. 60
Analog outputs. 40
Feedback inputs. 40