fadini CORAL 1050, Инструкция по эксплуатации

Страница: 10 / 16

CORAL
Pic. 13
VERSION OF CORAL WITH SOLENOID VALVE
In the version of
CORAL with solenoid valve
no manual overriding action is needed, and in case of power failure the post descends
automatically ush with pavement level. To enable the solenoid valve to operate properly, the electric wires labelled
“ELETTROVALVOLA - Solenoid valve” from the post assembly are to be connected, through the
voltage stabilizer
, to terminals 22
and 23 in the Elpro S40 control box.
GROUND-LEVEL CLOSURE - COVER PLATE
• Use the four screws to close the cover plate.
• Lift the retractable post for facilitate closure of the post cover
with the buffer, give the command (by encoding a transmitter
with the radio receiver or a key switch) to lift the retractable
post.
Post cover
Rubber buffer
Cover plate
Retractable
post
GREASE
IMPORTANT: WE RECOMMEND
GREASING ALL CLAMPING
SCREWS
!
Pic. 12
CORAL with solenoid valve
230 V
230 V
= =
NO
CORAL with solenoid valve
SOLENOID VALVE
22 23
STABILIZER
CORAL with solenoid valve
ATTENTION: IT IS REQUIRED THAT
THE POST BE ASSISTED TO REACH THE
FULLY FLAT DOWN POSITION
10
fully retractable oil-hydraulic bollard