fadini CORAL 1050, Инструкция по эксплуатации

Страница: 9 / 16

CORAL
9
ELECTRICAL CONNECTIONS TO THE CONTROL BOARD
Pic. 11
Pic. 10
FIRST OPERATION MANOEUVRES
Having terminated installation of the traffic control post and all the safety and control accessories (
all of the NC contacts on the
Elpro S40 board are to be bridged
), and the respective connections with the Elpro S40 programmer, and having completed
thorough risk analysis, the rst operation manoeuvres can be performed. If you have a radio transmitter, encode the radio receiver
according to the relative instructions before giving the command to raise the retractable post, or give the manoeuvre command
using a key switch. Once power is supplied, connect the motor/pump cable and, satis ed that the limit switch LEDs are properly
alight, the post should move up on the rst commanding pulse; should it fail, disconnect power supply and swap the connections
to the live terminals.
NOTE WELL: supply the system with electric power only after all of the electrical connections have been made as
required for proper operations.
20 µF
A
NC
230 V
1 st pulse
In case of multiple installations go
through the same procedure with each post
All NC contacts are to be closed
B
Should the motor fail
to drive the post up by
rst pulsing, swap the
connections to the electric
motor live terminals only
16 18 17 16 18 17
ELPRO S40
Standard Coral
Coral with
LED lights
Coral with
LED lights
Coral with
solenoid valve
20 µF
Coral with LED lights
A
11 12 13 16 17 18 22 23 52 53 52 53
B
STABILIZER
55 56
+ -
FINECORSA
EFFETTO HALL - cavo blu
HALL LIMIT SWITCHES
- blue cable
CORAL bollard
with HALL
limit switches
fully retractable oil-hydraulic bollard
!