fadini CORAL 1050, Инструкция по эксплуатации

Страница: 12 / 16

12
PRODUCT SPECIFICATIONS
Heavy duty, fully retractable, automatic bollard made up of an incorporated oil-hydraulic motor pump unit and an oil-hydraulic
actuator inside the moving cylinder. Suitable for applications in private and commercial areas, and for industrial installations.
IP67. The height of the rising cylinder (from ground level) can be 500/600/800 mm. The rising cylinder is made of S235JRH steel,
thickness 5 mm and Ø 100 mm, cataphoresis treated and powder coated. Rubber ring on cylinder head. Cataphoresis treated
aluminium cover with slip proof nish on treadable top. Rising cylinder tted with high intensity, microprismatic, retrore ecting
approved sticker (h 80 mm), available with signal LEDs (N.4) with ashing light tted all around the top. Hot dip galvanized steel
casing for ground foundation, tted with a cover allowing access to the hydraulic release for manual lowering of the bollard by
a special spanner in an emergency. Impact resistance 30.000 J, breakout resistance 150.000 J, static load max 1.600 kg in
standing position, max 20.000 kg in lowered position. Working temperature -40 °C +80 °C. Supply voltage 230 Vac ± 10%, 50 Hz.
Absorbed power 330 W. Rising time ~ 4,7 s [rising cylinder H 500 mm], ~ 5,6 s [rising cylinder H 600 mm] ~ 7,5 s [rising cylinder
H 800 mm]. Frequency of use 2.000 cycles/day. Hydraulic device to lock the bollard in the standing position, on request a
solenoid valve can be tted for the spontaneous descent of the bollard in case of a power failure.
1) Installation operations, testing, analysis of the risks and future maintenance are to be executed by quali ed and authorized
technicians in compliance with the existing regulations (www.fadini.net/supporto/download).
2) This automatic system is intended to be exclusively used for the applications described in this manual, including all of the
safety and command accessories, at least as required.
3) Any application not indicated in this manual may cause malfunctioning or damages to people and properties.
4) Make sure the soil is adequate to take the bollard to avoid that settling at a later stage causes problems to the system.
5) Make sure the site is free from utilities that may interfere with it.
6) Make sure that electromagnetic sources are at a suitable distance from the accessories, especially from the loop detectors.
The magnetic elds of other sources might affect the detections of the safety loops as well as those of the other command and
safety devices of the system.
7) Make sure the power supply to the electric motor is 230 V (50 Hz).
8)
It is recommended either of the following power supply cables:
- 10 meters electric cable 4x1 mm² for motor pump power supply;
- 10 meters electric cable 3x0,5 mm² for limit switches.
The section of the ground cable is to be chosen in compliance with the requirements of the installation site.
9) In case any components or accessories need replacing, use only original parts as provided by the manufacturer.
10) The installer shall provide the nal user with information related to all of the operating commands and functions of the
system, including that concerning lowering of the post in case of an emergency (manual release operation).
11) The installer shall inform the nal user of the dangers coming from the presence of persons, especially children, in the
proximity of the bollard.
12) The manufacturer reserves the right to change this manual without previous notice.
As far as con guration and execution of the system are concerned, these are to comply with the laws in the country of
installation.
Meccanica Fadini is not liable for any possible damages derived from incorrect use or from any use not indicated in this
manual, furthermore it is not answerable for malfunctioning caused by the use of materials or accessories not approved by
the company itself.
It is to be noted that the product respects the impact and breakout resistance values as indicated provided that the
installation of the same is carried out in observance of the speci cations included in this manual of instructions. Various
factors are to be carefully taken into consideration such as compaction index, soil permeability coefficient, concrete type,
which may affect the indicated values even signi cantly.
WARNINGS
CORAL
fully retractable oil-hydraulic bollard