Mini-Mag Service Manual V1.0
13
13-33
CENTRAL COMMAND CONTROLLER
Repair break in the wiring
between terminal #86 (black wire)
and the negative buss bar
Is there
battery voltage
across these
terminals?
YES
Using a voltmeter set the meter to DC volts.
Measure the voltage between terminals #85
(red wire) and the negative battery terminal
on the controller
Is there
battery voltage
across these
terminals?
Repair the connection from the
controller negative battery terminal
to the negative circuit breaker
YES
NO
Using a voltmeter set the meter to DC volts.
Measure the voltage between terminals #85
(red wire) and each of the negative buss bar
circuit breaker terminals with the key on.
Is there battery
voltage at both circuit
breaker terminals?
Is there
battery voltage at
either circuit breaker
terminal?
NO
NO
Replace the negative buss
bar circuit breaker
YES
Repair break in wiring
between the negative buss
bar and the circuit breaker
Is there
battery voltage
across these
terminals?
YES
Repair connection
between terminal #87 and
the positive buss bar
YES
Using a voltmeter set the meter to DC volts.
Connect the ( -) probe of the meter to the ( - )
buss bar with a clip on your meter probe.
With the positive lead of your meter measure
the voltage at terminal #30 (red wire #) on the
buss relay with the key on.
NO
Is there
battery voltage
across these
terminals?
Replace the buss
relay
Using a voltmeter set the meter to DC volts.
Connect the ( -) probe of the meter to the ( - )
buss bar with a clip on your meter probe.
With the positive lead of your meter measure
the voltage at the main positive circuit
breaker with the key on.
NO
Is there
battery voltage
across these
terminals?
CALL THE FACTORY!
NO
Repair the connection between
the main breaker and the #30
terminal on the buss bar relay.
YES
MiniMAG – TRACTION DRIVE w/CCII
BUSS RELAY DIAGNOSIS
2 of 2
From
Page 1-
A-
From
Page 2
-B-
NO
YES
Содержание MINI-MAG SERIES
