Mini-Mag Service Manual V1.0
3
3-7
SQUEEGEE SYSTEM
The squeegee has trailing wheels that MUST touch the floor and roll as the machine is
traveling forward. They MUST both be adjusted to the same height. You can check their
adjustment by removing the squeegee from the machine, making sure the squeegee has
good blades on it and setting the squeegee on a flat surface.
The wheels will wear down under normal use and their diameter will change. To maintain
the system properly, the customer receives new trailing wheels with the squeegee blade kit.
The trailing wheels should be changed when the blades are changed or immediately if they
become damaged.
Our squeegee trailing wheel system is theoretically “not adjustable” meaning that it is not
intended for end-users to adjust it.
If you have good wheels of the correct diameter on the squeegee, and they contact the
floor incorrectly, then observe the space between the wheels and a flat surface with the
squeegee tool off of the machine. Adjust the rear wheel bracket heights as necessary to
make them equal using washers or shims.
NOTE:
To make a wheel lower toward the floor, insert a washer under its FRONT bracket bolt.
To make the wheel raise from the floor, insert a washer under each FRONT and REAR bolt.
Содержание MINI-MAG SERIES
