![background image](http://html1.mh-extra.com/html/faac/s800h-enc/s800h-enc_manual_3230778004.webp)
4
532096 Rev. B
S800H ENC
ENGLISH
T
ranslation of the original instructions
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
(2006/42/CE ANN.II P.1, LETT. B)
Manufacturer and person authorised to prepare the relevant technical documentation
Company name:
FAAC S.p.A.
Address:
Via Calari, 10 - 40069 Zola Predosa BOLOGNA - ITALY
hereby declares that for the partly completed machinery:
Description:
Model:
S800H ENC
the essential requisites of the Machinery Directive 2006/42/EC (including all applicable amendments) applied and met are:
RESS 1.1.2,1.1.3,1.1.4,1.1.5,1.1.6,1.2.1,1.3.1,1.3.2,1.5.1,1.5.4,1.5.9,1.5.13,1.6.3,1.7.1,1.7.2, 1.7.4
and that the relevant technical documentation has been compiled in compliance with part B of Annex VII.
Furthermore, the following harmonised standards have been applied:
• EN ISO 12100:2010
• EN 60335-1:2013
• EN EN 60335-2-97:2006
It is also hereby declared that the partly completed machinery identified above may not be commissioned until the final machine - into which it will be
incorporated - has been declared to conform to the provisions of the above mentioned Machinery Directive 2006/42/EC.
Bologna, 22-01-2015
CEO
A. Marcellan
1 DESCRIPTION
Bleed screw
Support handle
Pinion
Fixing screws
Mechanical limit switch
stops adjustment screw
hydraulic release lever
Oil filler cap
Engine
Electronic encoder
Support box
Bores for fixing cover
Slots for fixing jack
Support bush
Flaps for recessing support
box
Bore for power cable
or drain pipe
Mechanical release lever
(optional)
Key-operated release device
Release and adjustment key
and support bush
Splined bush
Cover
These instructions apply to the following models: S800H ENC
SB/SBW
- S800H ENC
CBAC
/ 100° - 180°.
FAAC
S800H ENC
is an automation in a hydraulic monobloc (CLASS III), for the access of vehicles through swing gates. Retractable
in the ground, it does not change the looks of the gate.
The model equipped with hydraulic lock does not require installation of
the electric lock, mechanically locking the leaf, up to 2 m, when the motor is not running. The model without hydraulic lock always
requires one or more electric locks to guarantee mechanical locking of the leaf.
S800H ENC automations are designed and built to automate swing gates. They must not be used in any other way.
Fig.1
TECHNICAL
FEATURES
CBAC OPERATOR
OPERATOR
SB/SBW
Power supply (
V
)
24
Absorbed power (W)
60 (*)
Protection rating
IP 67
Oil type
"FAAC HP OIL"
Operating temperature
-20° C +55°C
Rated Operating Time (R.O.T.)
Continuous duty at 55°C
Hydraulic lock
Included
Not included
Max torque (Nm) **
500 (E024S) ; 600 (E124)
2 TECHNICAL
FEATURES
Angular speed (°/sec) ***
5.5 (E024S) ; 8.2 (E124)
Max opening angle ****
113° (S800H ENC 110°)
187° (S800H ENC 184°)
Max leaf length (m)
2
4 (electric lock
mandatory)
Max leaf weight (kg)
800
* EACH INDIVIDUAL OPERATOR
** CONSIDERING 55 Bar OF STATIC PRESSURE IN THE CHAMBERS
*** CONSIDERING A PUMP FLOW RATE OF 0.6 lpm
**** 3° OF STROKE IS LOST DURING INSTALLATION
OF THE OPERATOR
Содержание S800H ENC
