1
Alarm enabled,
no signalling.
Indoor temperature is 19˚C
Main menu
...
Alarm disabled,
no signalling.
Indoor temperature is 19˚C
Main menu
...
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Disabling the alarm
If the telephone transmitter signals that the alarm
system is enabled, it can be disabled:
- press push-button
after the message,
- the telephone transmitter confirms that the alarm was
disabled.
1
*
3
2
To speak to the persons in the room
where the control unit is located.
To listen to what is happening in the
room where the control unit is installed.
Press to return to the main menu
Main menu ...
Alarm disabled, no signalling
Indoor temperature is 19˚C
Main menu
- to enable the alarm, press
- to listen, press
- to speak, press
- to customise the telephone
transmitter, press
- to hang up, press twice
1
2
3
4
#
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
*
Listen and speak in the protected
rooms
You can listen to what happens and speak with a
person near the transmission control unit for 30
seconds.
- press push-button
to listen,
- press push-button
to speak,
- press
to return to the main menu,
The maximum time allowed between each key-
pressing is 30 seconds. When this time period has
elapsed, the telephone transmitter reads the main
menu again.
3
2
The use time of the “speak” and “listen”
functions is restored 30 seconds after push-buttons
and
are pressed (conversation mode).
The telephone transmitter signals the change of
function with a beep.
3
2
Remote control and questioning of the system
Use
34