29
AP
EFF
TEST
Passage open signal
Peripheral units fault /
Telephone line fault
Discharged batteries
Deleting several devices
Prepare the control unit before
every operation
- the control unit must be in
ADD DEVICES mode
(see
chapter “Adding devices to the system”).
Deleting all the devices except the
outdoor siren
To avoid having to re-configure the siren:
- press, for more than 5 seconds, the yellow DELETE
(EFF) push-button of the control unit,
- the control unit sounds a long beep and the 5
indicator lights flash simultaneously.
Deleting all devices
- press, for more than 10 seconds, the yellow
DELETE (EFF) push-button of the control unit,
-
the control unit sounds a first long BEEP,
- continue pressing the push-button until you hear the
second BEEP,
-
the 5 indicator lights flash simultaneously.
Deleting all devices from an area
To ensure that the sensors are no longer integrated in
an area, although they continue operating when the
alarm system mode on is enabled.
- put the control keypad in AREA CREATION mode
(see chapter “Create surveillance areas”; page 21),
- confirm to view “XX -----”,
- press, for more than 5 seconds, the yellow DELETE
(EFF) push-button of the control unit,
- the control unit sounds a brief beep,
- no device is integrated in that area any longer.
OK
OK
+
-
C
INFO
INFO
+
-
OK
+
-
C
INFO
INFO
OK
AP
EFF
TEST
Passage open signal
Peripheral units fault /
Telephone line fault
Discharged batteries
Example:
delete
area 1
Impor
Impor
tant:
tant:
In these two cases, add the devices again, beginning
with a keypad.
Deleting