33
Remote control and questioning of the system
Signalling an event
When the telephone transmitter answers, type in the
access code.
The welcoming message signals the alarm system’s
current status and the internal temperature.
To delete an event, after consultation, press push-
button .
0
0
Hello, type in the access code
1
3
2
5
4
6
Example: 123456
0
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
The alarm is enabled.
On 17 June 2004 at 12:37 hours,
intrusion alarm - bedroom 2.
Indoor temperature is 19˚C.
Main menu
To delete the alarm message, press
...
Alarm enabled, no signalling,
Indoor temperature is 19° C.
Enabling the alarm
If the telephone transmitter signals that the alarm
system is disabled, it can be enabled in system mode
on alarm:
- press push-button
after the message,
- the telephone transmitter confirms the enablement.
1
1
Alarm disabled,
no signalling.
Indoor temperature is 19˚C.
Main menu
...
Alarm enabled,
no signalling.
Indoor temperature is 19˚C.
Main menu
...
Alarm ON / Alarm OFF
Maintenance Program mode
2 secs.
Alarm memory-stored / In progress
System sabotage alarm
Discharged batteries
Peripheral units fault /
Telephone line fault
Passage open signal
Call the control unit
See chapter “Customising the system”
Impor
Impor
tant:
tant:
The control unit can enable the alarm only in system
mode on. To enable the alarm in one of the areas, the
keypad must be used.
Use