Customising the system
Naming devices
After you have typed in the access code for displaying
the system’s current status, press the configuration
push-button.
Select the
LEARNING
menu, and then confirm.
As soon as learning has finished, select the
NAME
DEVICES
menu and then confirm.
There are two way of naming a device:
- press the test push-button of the device to be named
(remote-controls excluded), and the type of device and
serial number will be shown.
- select the device with keys
. The first two
letters refer to the type of device.
If you press the
key, the type of selected device
will be signalled (for example: opening detector…).
Press
again to name the device, selecting the
name from among those on the list: entrance,
bedroom, bathroom, garage, …
- confirm the choice of name with
and then, assign
a number to it,
- if no preset name is correct, select
OTHER
and type in
the desired name letter by letter (7 characters
maximum).
The control unit will confirm the recording with a beep
and
NAME DEVICES
will be shown.
OK
OK
OK
OK
OK
OK
+
-
Select a device with
push-b and – on the
keypad
C
INFO
INFO
OK
OK
+
-
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
INFO
+
-
Select a device pressing
the relevant TEST push-
button
CS telephone transmitter
control unit
IR
movement detector
CO opening detector
TL keypad remote-control
TT telephone transmitter
SE outdoor siren
CL control keypad
DT technical detector
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
OK
OK
OK
OK
+
-
C
INFO
INFO
+
-
OK
OK
+
-
C
INFO
INFO
+
-
Impor
Impor
tant:
tant:
If you choose
OTHER
, the voice message of the
telephone transmitter will not refer any name.
Customising
20