FAAC Estate Swing e-sU 2200 series, Инструкция по эксплуатации

Страница: 22 / 25

!'
# #
Installing the Receiver
1) Locate the 5 Silver Pins in the lower right hand corner
of the Estate Swing board.
2) Locate the white connector on the receiver.
3) Push the
white
connector from the receiver on the 5
pins on your FAAC board with the dip switches of the
receiver board facing AWAY from the center of the
Estate Swing board.
Setting the Dip Switches
1) Set the dip switches 1-12 on the receiver by
switching them in the up or down position.
Record this dip switch combination
2) Slide off the battery cover of the transmitter
(located at the bottom front cover)
3) Set the dip switches in the transmitter to the
same settings as the dip switches on the receiver.
4) Repeat this for all of the transmitters.
.