![background image](http://html1.mh-extra.com/html/faac/b614/b614_manual_3110034052.webp)
B614
50
532297 - Rev.D
11. MAINTENANCE
F
Always shut off the power supply before performing
any maintenance operations. If the disconnect
switch is not in view, apply a warning sign stating
“WARNING - Maintenance in Progress”. Restore the
power supply only after finishing any maintenance
work and restoring the area to normal.
Do not remove the board cover. No maintenance
requires the removal of the cover.
!
The barrier must not be left released. If the barrier
is put out of order for a long time, the arm needs to
be removed.
Maintenance must be performed by the installer or a
maintenance technician.
Follow all safety recommendations and instructions
given in this manual.
Mark off the work site and prohibit access/transit. Do
not leave the work site unattended.
The work area must be kept tidy and cleared after
maintenance has been completed.
Before starting work, wait for any hot components
to cool down.
Do not make any modifications to the original
components.
FAAC S.p.A. shall bear no liability for damage or
injury due to components that have been modified
or otherwise tampered with.
The warranty shall be forfeited in the event of tam-
pering with components.
Only use original FAAC spare parts.
11.1 ROUTINE MAINTENANCE
The Routine maintenance lists, purely for guidance
which is not intended to be exhaustive, the operations
which must be performed on a regular basis to keep
the automation system safe and in good working order
(see
Routine maintenance).
Repair or restoration is necessary if the tests listed in
Routine Maintenance turn up conditions that are other
than expected. The barrier must not be put back into
operation until all specified safety precautions have
been complied with.
Содержание B614
Страница 1: ...B614...