![background image](http://html1.mh-extra.com/html/faac/b614/b614_manual_3110034005.webp)
B614
3
532297 - Rev.D
Important Installation Instruc
tions
1. Install the gate operator only when the
following conditions have been met:
•
The operator is appropriate for the type
and usage class of the gate.
•
All openings of a horizontal slide gate
have been guarded or screened from
the bottom of the gate to a minimum
of 4 feet (1.25 m) above the ground to
prevent a 2.25 inch (55 mm) diameter
sphere from passing through openings
anywhere in the gate or through that
portion of the adjacent fence that the
gate covers when in the open position.
•
All exposed pinch points are eliminated
or guarded.
•
Guarding is supplied for exposed rollers.
2.
The operator is intended for installation on
gates used by vehicles only. Pedestrians
must be provided with a separate access
opening.
3.
To reduce the risk of entrapment when
opening and closing, the gate must be
installed in a location that allows adequate
clearance between the gate and adjacent
structures. Swinging gates shall not open
outward into public access areas.
4.
Before installing the gate operator, ensure
that the gate has been properly installed
and that it swings freely in both directions.
Do not over-tighten the operator clutch or
pressure relief valve to compensate for a
damaged gate.
5.
User controls must be installed at least 6
feet (1.83 m) away from any moving part
of the gate and located where the user
is prevented from reaching over, under,
around or through the gate to operate the
controls. Controls located outdoors or those
that are easily accessible shall have security
features to prevent unauthorized use.
1. IMPORTANT SAFETY INFORMATION
Important Safety Instructions
WARNING - TO REDUCE THE RISK OF SEVERE
INJURY OR DEATH:
•
READ AND FOLLOW ALL INSTRUCTIONS.
•
Never let children operate or play with the
gate controls. Keep remote controls away
from children.
•
Always keep people and objects away
from the gate. NO ONE SHOULD CROSS
THE PATH OF A MOVING GATE.
•
Test the gate operator monthly. The gate
MUST reverse on contact with a rigid
object or when an object activates a non-
contact sensor. If necessary, adjust the
force or the limit of travel and then retest
the gate operator. Failure to properly
adjust and retest the gate operator can
increase the risk of injury or death.
•
Use the manual release mechanism only
when the gate is not moving.
•
KEEP GATE PROPERLY MAINTAINED. Have
a qualifi ed service person make repairs to
gate hardware.
•
The entrance is for vehicles only.
Pedestrians must use a separate entrance.
• SAVE
THESE
INSTRUCTIONS.
Содержание B614
Страница 1: ...B614...