SERIES
9900
RANGE SELECTION3 G [ 30 mG ]
300 uT [ 3 uT ]
3 riT [ 30 mT ]
30 riT [300 riT ]
300 MT [ 3 mT ]
3 T [ 30 T ]
30 1 * [300 T ]
300 T
AUTO TESLA
IX-10X [ .01X ]
30 G [300 mG ]
300 G [ 3 G ]
3 KG [ 30 G ]
30 KG [300 G ]
300 KG [ 3 KG ]
3 MG
AUTO GAUSS
CHANNEL-1
CHANNEL-2
CHANNEL-3
HELP
MAIN MENU
RUN
9000
SERIES
GAUSSMETERS
SECTION I V continued
Menu Operation/Gaussmeter
Programming
Figure IV-D
RANGE SELECT Menu
One other selection in this menu is the AUTOranging mode. This feature
allows the gaussmeter itself to select a range appropriate for the present
intensity of the field to obtain the best resolution. Note that AUTOranging will
cause a slight degradation in the system speed.
The present range setting always appears in the channel's information block
in the MEASURE mode display screen as field measurements are being
taken (See Figure III-D). If the AUTOranging mode is selected, the AUTO
indicator will appear in the block as well.
IV-F PEAK HOLD
PEAK HOLD allows the largest absolute field measurement to be captured
and held indefinitely. When engaged, the PEAK indicator will appear in the
channel's information block in the MEASURE mode display screen as field
measurements are being taken. (See Figure III-D.)
The presently held peak can be manually reset at any time during the
measurement process by pressing and releasing the channel's respective
RESET pushbutton. The PEAK indicator will flash momentarily to indicate
that the reset is in progress, but a new peak will not be captured until the
pushbutton is released (See Section III-H for more information).
PEAK HOLD
CHANNEL-1
CHANNEL-2
CHANNEL-3
HELP
MAIN MENU
RUN
ON
OFF
Figure IV-E
PEAK HOLD Menu
IV-G DISPLAY FORMAT
As seen in Figure III-D, each channel's display field has a digital and a
bargraph representation of the field density reading. This format can be
changed using the DISPLAY FORMAT menu.
19
