EZG FHN9 Скачать руководство пользователя страница 4

Страница: 4 / 46

1-800-417-9272 www.ezgmfg.com

Revision Number-001 01-01-2020 - Present

WARNING

Failure to obey the following safety instructions could result in DEATH or

SERIOUS INJURY.

Read and understand

this

entire manual before operating the Fork-N-Hog Forklift.

For your safety and the safety of others, replace any missing or damaged warning decals by contact-

ing the manufacturer at 1-800-417-9272.

Make sure anyone operating the Fork-N-Hog Forklift is thoroughly familiar with its operation. Keep all

unauthorized and untrained personnel, especially children

, away from operating the Fork-N-Hog.

Improper maintenance can be hazardous. Read and understand this section before you perform

any maintenance, service or repairs.

General Safety

•

The Fork-N-Hog should only be lifted by qualified personnel.

•

DO NOT lift the machine by the ROPS.

•

DO NOT lift the machine from the bottom side using forks. Mechanical and electrical components

can be damaged from this lifting position.

•

Never exceed the rated capacity of the piece of lifting equipment being used to lift the Fork-N-Hog.

•

All rigging should be inspected per OSHA requirement.

•

Never stand under a suspended load

SAFETY PRECAUTIONS

Содержание FHN9















































Результаты поиска

Содержание FHN9

Отзывы:

Похожие инструкции для FHN9

Бренды по названию

Популярные бренды

EZG FHN9, Руководство пользователя

Результаты поиска

Содержание FHN9

Отзывы:

Похожие инструкции для FHN9

Бренды по названию

Популярные бренды