EZG FHN9, Руководство пользователя

Страница: 12 / 46

10 Revision Number-001 01-01-2020 - Present EZG Manufacturing 1-800-417-9272 www.ezgmfg.com
In the case of downhill slope, release the accelerator pedal to obtain reverse current braking. If reverse
current braking cannot control the speed of downhill slope (the downhill slope speed is too fast), the brake
pedal should be pressed at this time to slow the Forklift.
Warning: Never leave the Forklift before applying the parking brake (hand brake.
Directional Lever (Forward / Reverse
To change direction, use the Direction Lever on the console (as shown in the fig.1 - 2). Push the lever
forward so the Forklift moves forward and pull the lever back to move the Forklift backward.
Allow the Forklift
to stop between shifting.
Accelerator Pedal
Be aware of the Forward/Reverse selection. Press the
accelerator pedal
(fig. 2 - 3) slowly with your right
foot for the Forklift to move forward or backward.
Warning: Never press the accelerator pedal with excess force to avoid the Forklift getting out of
control resulting in an accident.
The Foot Brake Pedal
To stop the Forklift, take your right foot off the accelerator pedal, and press the brake pedal (fig. 2)
until the Forklift has completely stopped.
Do not press the accelerator pedal and the brake pedal at the same time as that will burn out the
electric component.
The Emergency Stop Switch Button
If the Forklift suddenly gets out of control, you smell/see any fumes or any other potentially dangerous
conditions, immediately press the red Emergency Stop Switch on the console to immediately cut off the power.
Only after examining and correcting the unsafe condition should you turn on the Forklift. To turn on the
Forklift rotate the red Safety Switch in a clockwise direction lightly until the button springs up and resets.
Warning: Never turn on the power if you have not found the cause of the problem.
Do not use excess force on the red Emergency Switch to avoid possible damage.
The Horn and the Reversing Buzzer
For driving the Forklift safely, the Forklift is equipped with a horn (Fig. 1 – 5) and a backup alarm
reversing buzzer. The Horn Button on the console. Press it
lightly
to sound the horn. The Backup Alarm
Buzzer is actuated when the Direction Lever is moved into the reverse direction .
START/STOP PROCEDURE