EZG FHN9, Руководство пользователя

Страница: 23 / 46

1-800-417-9272 www.ezgmfg.com
Revision Number-001 01-01-2020 - Present
21
SERVICE & MAINTENANCE
Check the Second Chain Transmission
• Loosen the screws of the hinges of the battery cover & remove.
• Loosen the screws used to fix the rear
bar
of the
ROPS and remove
.
• Loosen the connection of the rear ballast .
• Lift the rear ballast by about 3-5cm.
• Remove the rear ballast.
• Pull the chain using the screw fixed on the flange to obtain the optimal tension of chain.
• Grease the chain.
• Turn the steering wheel to test whether the steering wheel turn easily.
• Repeat the operations in reverse order indicated above-mentioned to install the parts removed.
Note: Before operating the above-mentioned steps make sure that the key has been removed
and that the parking brake is on. The rear of the Forklift is blocked with suitable block s to make
the driving wheel turn freely.
Fig.4 - The Turning System
1.The steering wheel;
2.The steering column;
3.The steering column locknut;
4.Driving wheel;
5.The reduction unit;
6.The first chain transmission;
7.The second chain transmission