background image

1-800-417-9272             www.ezgmfg.com

 

 

Revision Number-001     01-01-2020 - Present                                      

EZG Manufacturing

California - Proposition 65 Warning

Engine exhaust and some of its constituents, and some dust created by power sanding,

sawing, grinding, drilling, and other construction activities contains chemicals known to the 

State of California to cause cancer, birth defects and other reproductive harm. Some examples 

of these chemicals are:

Lead from lead based paints -  Crystalline silica from bricks -Cement and other masonry 

products -Arsenic and chromium from chemically treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To 

reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work 

with approved safety equipment, such as dust masks that are specially designed to filter out 

microscopic particles.

MACHINE DESCRIPTION

The 24-volt battery powered EZG Fork-N-Hog Forklift is unique in its shape, heavy-duty yet compact

carriage and ergonomic, comfortable operation. Designed for narrow passages and small operating

areas, the Fork-N-Hog can easily transport over one US ton of goods in small freight elevators, cargo

containers and enclosed trailers. With the special three-point drive designed framework, variable

wheelbase and the rear drive unit, the mini Fork-N-Hog has excellent stability and a 90 degree turning

angle capability.

Mast

Tilt / Lift Cylinders

Emergency Stop (Color Red)

Load Backrest

Brake Pedal

Accelerator Pedal

Forks

Front Wheels

Chassis

Motor/Battery

Compartment

Drive & Steer Wheel

Counter Weight

Control Panel Console

Operator Cab

Hand Brake

Lights

Overhead Guard

Mast Control

Содержание FHN9















































Отзывы: