- 19 -
3.2 Recording Frame Setup
Adjust Recording Frame, Resolution, Pre/Post Alarm, Audio and so on.
1. Default Settings – set all cameras as default setting.
Previous Settings – set all cameras as previous setting.
Intensive Settings – adjust Intensive Recording Options (ref 3.2.1 Intensive Recording)
Regular Interval Settings – adjust Regular interval setting (refer 3.2.2 Regular Interval)
Video Loss Setting – adjust options for the case when there is no video signal (refer 3.2.3)
TV Out Settings –TV out Options setting (refer to chapter 3.2.4 TV Out setting)
2. Automatic Switching Interval – adjust the interval time of Auto-Switching Camera Screen
3. Video Format– select the Video Format only if you have to change the format. You need to re-start DVR
program to apply this setting
4. Estimated Recording Time – Displays the estimated recording duration according to current recording frame
setup. (After then, the old data is deleted automatically)
5. Recording Resolution, Speed, Pre/Post Alarm, Audio, Image Quality setting
Resolution: you can select recording resolution among 360x240, 720 x 240 and 720 x 480
(in case of PAL: 360x288, 720 x 288, 720 x 576)
Frame: select Recording Speed from 0 – 30fps (in case of PAL: 0-25) for each Camera
Pre-Alarm: select Recording Time before Event
Post-Alarm: select Recording Time after Event
Audio Ch: select Audio Channel which you want to link to the Camera
Audio Gain: select Recording Frame for Audio
Quality: select Image Quality of Recorded data, 3 is Normal.
1
2
4
5
3
Содержание 0412
Страница 45: ... 45 Backup Chapter 5 ...